CIP 9136型10 kHz～400 MHz電流注入探頭

CIP 9136型10 kHz～400 MHz電流注入探頭

符合英國國防標準59-41中的規定也滿足DO-160C、HIRF用戶指南ED 14CSAE和Euro CAE的要求汽車BCI測試的理想探頭功率承載能力高達1kW頻率范圍寬，10 kHz～400 MHz提供校準夾具選項

The CIP 9136 probe has been manufactured to drawings and specifications laid down by QinetiQ. It meets the requirements for HIRF testing where conventional ferrite core material cannot handle the higher powers required (up to 1000 W), without changing characteristics when heated. Whilst having been initially designed to meet the specific requirements of Aircraft Testing from 10 kHz to 50 MHz, the CIP 9136’s unique non-ferrite core allows wide band performance from 10 kHz - 400 MHz, and above. The CIP 9136 core material is highly efficient and thermally rugged, thus allowing very high injected levels to be achieved with lower RF input powers. The core material can withstand far higher powers than conventional ferrite (up to 1000 W), which change characteristics in relation to the temperature.The probe material meets the requirements of ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and other standards. The probe performance can be measured using Calibration Jig PCJ 9201.The model CIP 9136A received a mechanical improvement, in difference to the original CIP 9136, for a better core positioning. this mandatory in the low frequency range and it improves the insertion loss.

Frequency range: 10 kHz - 400 MHzWindow diameter: 43 mmOutside diameter: 113 mmWidth: 61 mmWeight: approx. 2 kgInput connector: Type NMax. input power: 1000 WMax. time for continuous operation: related to the core temperature Rating at 10 kHz / 1000 W: approx. 10 min* Rating at 100 kHz / 500 W: approx. 7 min* Rating at 150 kHz / 500 W: approx. 5 min* Rating at 1 MHz to 400 MHz / 400 W: approx. 3 min*Max core temperature: 90?CTurns ratio: 1:1Primary inductance @ 1 MHz: 4.7 μH typicalSelf resonant frequency: 12 MHz typicalImpedance at resonance: 100 Ω typical *) Time based on a core temperature rise from 23°C to max. 90°C Part number Description 248525 CIP 9136A Current injection probe (BCI) 10 kHz-400 MHz 97-342-300 CIP-TC Traceable calibration (ISO17025), order only with CIP xxxx252052 PCJ 9201B Calibration jig for current probes, meets RTCA/DO-160 section 20, MIL-STD-461 and IEC/EN 61000-4-6

CIP 9136型10 kHz～400 MHz電流注入探頭

深圳市美佳特科技有限公司（簡稱“美佳特"）成立于2010年，致力于光通訊測試、通用電子測量及5G測試服務。美佳特以“無線溝通，溝通無極限 "企業使命，業務聚焦于精密測試測量儀器的租賃、銷售、維護、計量及測試環境搭建等一站式服務。N2843A Keysight 無源探頭 Keysight 是德

主營產品：示波器主機和模塊、眼圖儀、光譜儀、信號源、頻譜分析儀、網絡分析儀、阻抗分析儀、光通信儀器、誤碼儀、光時域反射儀、可調諧激光源、光功率計、光衰減器等。合作品牌：安捷倫、是德、泰克、安立、愛得萬、安騰、力科、馬可尼（IFR）、R&S、EXFO等。N2843A Keysight 無源探頭 Keysight 是德

主推：Agilent 86100D/C 示波器,keysight M8195A 任意波形發生器,Anritsu MS9740B/A 光譜分析儀,YOKOGAWA AQ6370D/E 光譜分析儀,keysight N1092A/C 采樣示波器,keysight E8257D 模擬信號發生器,keysight E5071C 矢量網絡分析儀